The workflow of the Chopper series usually consists of a series of ordered and critical steps
Time:
2024-09-30
Starting up and chopping Starting up the machine: Firstly start the mixing speed button and then slowly feed the product.
Starting up and chopping Starting up the machine: Firstly start the mixing speed button and then slowly feed the product. According to the process requirements, select the speed of the chopper and the speed of the chopper. Chopping process: During the chopping process, the materials should be evenly dispersed in the chopping plate to make the materials mixed and chopped evenly. During normal processing, the lid of the pot should be kept closed, do not put your hand into the pot under the lid to touch the blade. Chopper use check will turn to from low speed to high speed slowly control, according to the need to turn the pot and speed adjustment. Monitoring and Adjustment: The operator should always keep an eye on the operating status of the chopper to ensure that the chopping process runs smoothly. If abnormal sound or equipment malfunction is found, the machine should be stopped immediately for inspection.
Previous
Next
Previous
Next
Tel:
E-mail:
Add:
No. 2 Xusheng Road, Xinzhuang Industrial Park, Jinnan District, Tianjin City
